Posts

Showing posts from September, 2016

GPS AquaMeter Designed for Fast, Accurate Readings

Image
The GPS AquaMeter™ from Aquaread™ is the one of the most sophisticated, yet easy to use multiparameter water quality test system. No other equipment available can match the GPS AquaMeter™ and associated AquaProbes™ in either specification or value for money. Specifically designed to easily connect and display readings with the wide range of Aquaread multiparameter probes . The GPS AquaMeter™ is a breakthrough in functional and operating system design and was developed by an award-winning team of scientists and engineers whose experience includes the design of moving map satellite navigation systems for high speed military jets. With the GPS AquaMeter™ and its associated range of multiparameter probes, it is now possible to obtain fast, reliable, accurate and dependable water quality readings. Features of the GPS AquaMeter include tough, high impact, IP67 waterproof case with sure-grip rubber gasket to comfortably sit in the hand. Incorporated on the meter is a large, high con

Three Parameters In a One-Inch-Diameter Ground Water Probe

Image
The CTD-Diver instrument available from Bell Flow Systems offers a way of measuring and registering groundwater level, groundwater temperature and groundwater conductivity with a single instrument, all by using a device that fits into a one-inch probe! Monitoring groundwater levels and saltwater intrusion, injected wastewater, or contamination from chemical discharges and landfill sites used to be a labour intensive, difficult job. This is no longer the case, however, due to the introduction of the CTD-Diver. The CTD-Diver is an accurate measuring instrument with 3 sensors: a pressure transducer for determining water level, a temperature sensor for measuring temperature, and a sensor for determining conductivity. Conductivity is especially important for indicating pollutants in groundwater. The CTD-Diver is available in three standard pressure measuring ranges (10, 50 and 100-metre heads) conductivity measuring range 0 to 120 mS/cm). The measurements taken are stored in

Ori Waste Water Sampler Evolution

Image
The new generation of the ORI Basic Solid® sampler is now available with a new enclosure concept which has been developed to make operation more efficient and also to ensure that maintenance and cleaning activities are much easier. In addition to new air grills on the sides and a removable roof plate, the front panel can now be opened like a door which enables easy access to the electronics compartment. The Basic solid sampler is now equipped with a direct distributor system, ensuring that the route from intake point to the sampling bottle is a complete enclosed circuit Benefits: The Direct distributor system minimizes sample contamination errors as the sampled medium only has wet contact with the inert tubing material of the pump The pump module and components are protected from aggressive media and gases, avoiding problems of corrosion and material leaching. Largely clog-free design means that even sludge can be completely transferred through the sampling line to the bottl

APG PG2 Digital Pressure Gauge

Image
APG have introduced a new digital pressure gauge, the series PG2 IP65 Digital Pressure Gauge . APG are a supplier of innovative and differentiated products, solutions, and services for industrial process measurement and control. Technologies include pressure, flow, level control, analytics, and dedicated flexible control, using state of the art methodologies. The series PG2 Digital Pressure Gauge measures a wide range of gasses and liquids up to 5,000 psi with high accuracy. PG2 models contain all 304L stainless steel wetted parts and a fiberglass-reinforced PP plastic body. The PG2 benefits from a large, backlit, four-digit LED display, user-selectable Units of Measure, and two large buttons for an easy to use interface. Features include; optional 10 minute auto off, gauge re-zero and low battery alert. With an IP65-rated body, the series PG2 is an excellent choice for economic, highly accurate pressure measurements in tough outdoor or indoor environments. To find out more about

The Plum MacR6 Data Logger

Image
The Plum MacR6 is an intelligent readout and data logger range with built-in telemetry module offering simple installation and device configuration. MacR6 is available as a liquid or gas solution, registering flow and pressure with temperature option. When connected to the secure cloud based platform, eWebTel, the user is able to download and view all of the information from the device including historical data and graphs, allowing information to be accessed securely from any remote location 24/7. The MacR6 data logger benefits from a battery lifetime of 5-10 years dependent on settings and usage. The IP68 rated water network models record flow and pressure, while the ATEX gas flow measurement versions record P,T,Q, both available with Bluetooth local data retrieval and a choice of local or remote antenna.

Piusi Fuel Management System, Re-purposed!

Image
Bell Flow Systems were contracted to supply a dispensing management system to be used with water. The application called for a solution to allow registered users only, to dispense water from a large storage tank for window washing purposes and for the manager to monitor and control the amount of water they were using. We supplied a high accuracy Badger Meter Recordall water meter with pulse output connected to a Piusi MC Box fuel management system. The Piusi management system allows registered users to access the system with a unique pin code or key fob to activate the pump and deliver controlled batches of water from the tank. The device is equipped with a dual display, keypad and i-button key reader. The Recordall water meter is a positive displacement meter which accurately measures the quantity of water dispensed. The MC Box can be used with the Self Service management 2.0 software which allows the manager to download data from the MC Box device to the software to view

WWEM 2016

Image
WWEM is a focused event for companies and individuals who are involved with water, wastewater and environmental monitoring. WWEM comprises of a two day conference and an exhibition of over 150 companies who provide instruments and equipment to monitor, test and analyse water or wastewater and over 80 free technical seminar sessions on applications and case studies. Our team of trained sales engineers will be showcasing some of the large number of new products we have on offer, featuring Open channel flow meters, water network M2M loggers, water quality instruments, ultrasonic and radar level sensors, ground water level data-loggers and waste water samplers. Visit us on Stand 20.

New Website Launch

Image
Bell Flow Systems are pleased to announce the launch of our new and improved website. We have updated our site by adding a new improved chat function, new product categories, integrated blog, newsletter archive section, latest news and technical support page. As well as continuing to supply our existing product range we have also introduced new products and services from various companies including: Aquaread water quality testing,Mainstream Measurement open channel flow meters, APGlevel & pressure measurement products and Eurosens fuel consumption equipment to name but a few. An environmental monitoring section has been added to our website, displaying our new portfolio of testing, sampling and logging products. We offer a range of flow metering and monitoring equipment from well renowned suppliers from all over the world. Visit our new updated website to find out more about the products and services we provide.

AquaLink II Cost-effective Data Logging Device

Image
AquaLink II is a telemetry device with a built in data logger that is designed to allow the user to access data remotely on the web. This cost effective monitoring system benefits from being battery powered with a lifetime of 6 years. Designed to be connected to various sensors and instruments for the measurement of total flow, pressure and temperature as well as other measured values, the Aqualink system transmits data over WiFi or GPRS / GSM to a cloud based M2M monitoring platform. The stored data from the AquaLink II is automatically transmitted to the web portal at user assigned intervals, providing rapid access to the stored information. All operating parameters can be configured via the web based application. With up to 3 Digital inputs and 3 Analog inputs, sensor based alarms and weather proof IP68 ABS enclosure, the AquaLink II offers a complete system for data logging and leak detection.