Tuesday, 19 April 2016

When ATEX Flow Meter Selection is Critical

Specifying the correct flow meter for any application is important but becomes absolutely critical in potentially explosive environments.  In these situations only meters with the correct ratings and genuine certification must be specified.

The latest Macnaught MX-Series Ex range of oval gear flow meters have been tested and approved by FM, DEKRA and SIRA for use in ATEX Category 2 Zone 1 applications offering the ideal solution for applications requiring accurate flow measurement in environments where there is potential exposure to flammable gases, dust or vapours.

Available in aluminium and stainless steel, in sizes from DN8 ¼” up to DN50 2” and with a flow range from 0.5LPH to 1200LPM these meters are suitable for measuring, monitoring and batching thin to viscous fluids, corrosive chemicals and non-conductive liquids up to 85c. High viscosity models are also available for use with fluids over 1000cPs such as paints, adhesives and resins.

The MX Ex meters can be specified with either an NPN open collector or a NAMUR sensor. The NPN open collector with ATEX, CSA and FM approvals (IECEx pending) is an IP67 3-wire stainless steel field sensor. To compliment this a new 2-wire IP67 NAMUR field sensor with ATEX, IECEx and SIL2 approvals rated in chrome plated CuZn has been released.  ATEX ratings are II I G Ex ia IIC T6 on the NPN open collector and II G Ex ia IIC T6 Ga and II 1 D Ex ia IIIC T115C Da on the NAMUR sensor.

These positive displacement flow meters measure the volumetric flow rate of a moving fluid, the two rotating oval gears divide the material into fixed, metered volumes. This proven operating principle provides accurate volumetric flow measurements that are on the whole unaffected by variations in density, viscosity, or pressure. The MX Ex does not require flow conditioning or straight pipe runs, so they can be used in installations where space is limited without effecting performance.

To compliment these intrinsically safe flow meters a comprehensive range of flow rate indicators and totalisers, flow computers and batch controllers with ATEX, IECEx, CSA and FM approvals are also available.
The Macnaught MX-Series Ex range and intrinsically safe instrumentation are available in the UK exclusively from Bell Flow Systems, a leading manufacturer and distributor of flow measurement solutions.

Visit our website for more info on the Macnaught MX-Series EX range

Friday, 8 April 2016

New Gespasa Adblue Meters



Highly regarded Spanish manufacturer Gespasa have recently launched a range of waterproof electronic meters: MGI-100BLUE and MGE-100BLUE that are suitable for the measurement of various liquids such as water and AdBlue®. The meters contain a PVC measuring chamber with high accuracy oval gears. They have an enclosed front casing which prevents the ingress of water or Adblue®.

The MGE-100 has an integral battery powered LCD display which shows a 5 digit flow total in large easy to read numerals. A low battery warning and easily removable facia to swap out the battery, make servicing quick and easy.

The MGI-100 has a pulse output for retransmission of data to fluid management and control systems. The meter contains two signal channels including Reed switch and Hall effect.

A major advantage of these new electronic meters is that they can be fitted outdoors due to their IP66 weather proof casing. The flow rate in both meters is from 10 to 110 l/min with an accuracy of +/- 0.8%.

We are the representatives for Gespasa in the UK, if you would like more information on Gespasa products visit our website, call +44 (0)1280 817304 or email sales@bellflowsystems.co.uk.

Wednesday, 6 April 2016

MID Class 2 Ultrasonic Heat Meter



The Qualcosonic Heat 2 from Axis, represents a breakthrough in quality heat energy measurement vs competitive pricing.

This new range is available from Bell Flow Systems in sizes ranging from DN15 to DN100 and is fully compliant with the requirements of both Domestic and Non-domestic RHI schemes.

 As well as all of the usual features of a high end heat meter, this range includes the following output options; M-Bus, RS232/485, Modbus, 4-20mA, wMbus RF686, MiniBus, Pulse.