Introducing the New Wireless Rain Gauge

Bell Flow Systems are pleased to introduce the ARG100 rain gauge into their range of environmental measurement products. 

The ARG100 is a cost effective solution for precipitation measurement. The aerodynamic design ensure that the sensor does not interfere with the surrounding airflow ensuring that accurate measurement of precipitation is continuously achieved. The U.V resistant materials ensure robustness in the field to maintain a high level of measurement accuracy. In standard form the rain gauge is offered with a 0.20mm per tip pulse output, however additional options are available.


Measurement of rainfall is achieved using a traditional “tipping bucket” mechanism which has been proven as a reliable industry and scientific standard for the measurement of precipitation for many years. Each tip of the bucket provides a contact closure of a reed switch to create an output from the rain gauge.

The output from the ARG100 can easily be connected directly to our OM-CPPULSE101 for local data collection. The data received from the ARG100 can be calibrated to ensure that collected data is converted to represent accurate rainfall information. If however remote data collection is required our Aqualink II which offers GSM / GPRS collection, can provide data remotely to a PC, tablet or mobile phone. No software is required to view the data, only a web enabled device, where you can log onto to your personal device dashboard via a username and password.

Comments

  1. Ash Green3 August 2020 at 14:23

    Thank you so much for such an informative piece of information :)
    If anyone interested similar one's have a look here
    Besttoolsbrand

    Thanks

    ReplyDelete

Post a Comment

Popular posts from this blog

IRON-75 Fuel Transfer Pump

Image
Built to last.... IRON-75 Fuel Transfer Pump from European manufacturer Gespasa.  High quality self-priming, 75 Litres/min diesel pump available from Bell Flow Systems.  Buy on-line here   IRON-75 Self-priming. Eccentric self-adjusting blades With recirculation bypass ATEX models available here>>:  Suction: 5m · Delivery: 30m Free flow: 75 l/min Consumption: 1.9-4.5 Amps Motor: 0.5 kW 230 VAC self-ventilated 50/60 Hz single-phase with thermal cut-out protection S1 Continuous duty IP-55 Protection 3000 rpm Connection through 1"(BSP) threads and flange option It has built-in steel filter of 350 µm (micron). ON/OFF luminous switch with IP-55 protection 3m electric cable  Anti-corrosion treatment Also available as a wall-mount or drum mount fuel transfer kit :
Read more

GWR200 Flow Sensor from APG

Image
Bell Flow Systems are pleased to introduce the new GWR200 flow sensor from APG, which promises to take the problems and frustration out of your level measurement. The Systems True Echo™ Communication Tool, which provides a Modbus-to-USB connection for communication with True Echo™ Software allows for advanced configuration and monitoring of multiple True Echo™ sensors. Specifications includes an auto calibration for easy setup with the True Echo™ software, a robust IP65 ingress protection housing, innovative signal processing and disturbance signal suppression and featuring a range up to 10 feet with SS rod, 80 feet with cable. Additionally, the sensors are unaffected by foam, vapours or dust. The Sensor NEMA 6 housing comes as standard, and its 316 SS or PFTE-coated 316 SS probes can operate in process temperatures from -40° to 203°C. Robust and reliable, the GWR200 sensor makes difficult level measurements easy. With a programmable 4-20 mA or RS-485 Modbus outputs, and innovativ...
Read more

Badger Meter Vision 3000 Turbine Meter

Image
WRAS approved Vision Turbine Meter 3000 Badger Meters Vision series of turbine flow meters have been examined, tested and found to comply with the requirements of The Water Regulations Advisory Scheme which is also known as WRAS. The low cost turbine meters from the Vision series are well known on the market. A new addition to the series is the Vision 3000. The Vision 3000 is a good choice for applications ranging from 2 to 60 l/min. It is great for the exact measurement of small quantities of liquid as well as measuring low flow rates. The Vision 3000 turbine flow meter is entirely made out of Trogamid which is low-priced, transparent and ultra-light. All materials used are compliant with the requirements of the drinking water approval.The product can be used with a variety of liquids such as water, fuels, ink and weak acids and is resistant to ethanol and methanol. The meter has an accuracy of ±3% of actual flow. The Vision 3000 is available in DN12 in G 3/4" and N...
Read more