IRON-75 Fuel Transfer Pump


Built to last.... IRON-75 Fuel Transfer Pump from European manufacturer Gespasa. 
High quality self-priming, 75 Litres/min diesel pump available from Bell Flow Systems. 

 Buy on-line here  IRON-75

  • Self-priming. Eccentric self-adjusting blades
  • With recirculation bypass
  • ATEX models available here>>: 
  • Suction: 5m · Delivery: 30m
  • Free flow: 75 l/min
  • Consumption: 1.9-4.5 Amps
  • Motor: 0.5 kW 230 VAC self-ventilated 50/60 Hz single-phase with thermal cut-out protection
  • S1 Continuous duty
  • IP-55 Protection
  • 3000 rpm
  • Connection through 1"(BSP) threads and flange option
  • It has built-in steel filter of 350 µm (micron).
  • ON/OFF luminous switch with IP-55 protection
  • 3m electric cable 
  • Anti-corrosion treatment


Also available as a wall-mount or drum mount fuel transfer kit :


Comments

  1. StevenHWicker19 February 2021 at 16:16

    Very informative and impressive post you have written, this is quite interesting and i have went through it completely, an upgraded information is shared, keep sharing such valuable information. Self Priming Pump

    ReplyDelete
  2. Pearl Laboratory Supplies23 June 2021 at 12:56

    Pearl Laboratory Supplies LLC company is a leading service provider and our team has more than 10 years of experience in designing, manufacturing, installation, and commissioning systems for water treatment. water treatment chemicals are used in almost all boilers. Lastly to lower further the mineral content demineralization can be applied. Water treatment involves a lot of small subprocesses and equipment

    ReplyDelete

Post a Comment

Popular posts from this blog

GWR200 Flow Sensor from APG

Image
Bell Flow Systems are pleased to introduce the new GWR200 flow sensor from APG, which promises to take the problems and frustration out of your level measurement. The Systems True Echo™ Communication Tool, which provides a Modbus-to-USB connection for communication with True Echo™ Software allows for advanced configuration and monitoring of multiple True Echo™ sensors. Specifications includes an auto calibration for easy setup with the True Echo™ software, a robust IP65 ingress protection housing, innovative signal processing and disturbance signal suppression and featuring a range up to 10 feet with SS rod, 80 feet with cable. Additionally, the sensors are unaffected by foam, vapours or dust. The Sensor NEMA 6 housing comes as standard, and its 316 SS or PFTE-coated 316 SS probes can operate in process temperatures from -40° to 203°C. Robust and reliable, the GWR200 sensor makes difficult level measurements easy. With a programmable 4-20 mA or RS-485 Modbus outputs, and innovativ...
Read more

Badger Meter Vision 3000 Turbine Meter

Image
WRAS approved Vision Turbine Meter 3000 Badger Meters Vision series of turbine flow meters have been examined, tested and found to comply with the requirements of The Water Regulations Advisory Scheme which is also known as WRAS. The low cost turbine meters from the Vision series are well known on the market. A new addition to the series is the Vision 3000. The Vision 3000 is a good choice for applications ranging from 2 to 60 l/min. It is great for the exact measurement of small quantities of liquid as well as measuring low flow rates. The Vision 3000 turbine flow meter is entirely made out of Trogamid which is low-priced, transparent and ultra-light. All materials used are compliant with the requirements of the drinking water approval.The product can be used with a variety of liquids such as water, fuels, ink and weak acids and is resistant to ethanol and methanol. The meter has an accuracy of ±3% of actual flow. The Vision 3000 is available in DN12 in G 3/4" and N...
Read more