New Low Cost Calibration Services

We recently commissioned in-house test rigs for water, oil and micro-flows and can now offer scheduled calibrations and re-calibrations for flow meters of many measuring principles and sizes. Our test rigs are UKAS traceable and all calibrations are issued with a calibration certificate. Our flexible calibration service gives you peace of mind knowing that the meter you have purchased will be correctly calibrated and performing accurately and within its stated specifications (we can also offer an on-site calibration if required).


WATER
  • Small Water Rig: 1/2” up to 1”
  • Medium Water Rig: 1” up to 4”
  • Up to 1000 litres per minute
  • Most Measuring Principles
  • Single Point Calibration
  • Multiple Point Calibration
OIL
  • Small Oil Rig: 1/8” up to 1”
  • Medium Oil Rig: 1” up to 1 1/2”
  • Up to 300 litres per minute
  • Most Measuring Principles
  • Single Point Calibration
  • Multiple Point Calibration
MICROFLOW
  • Microflow Rig: 1/4”
  • Ethanol
  • From 1cc per minute
  • Most Measuring Principles
  • Single Point Calibration
  • Multiple Point Calibration




ON-SITE
We can come to you...
In addition to the option to return your flow meter to us, 
you can also request an on-site calibration from one of 
our technicians, using proven re-calibration techniques.

Comments

Post a Comment

Popular posts from this blog

IRON-75 Fuel Transfer Pump

Image
Built to last.... IRON-75 Fuel Transfer Pump from European manufacturer Gespasa.  High quality self-priming, 75 Litres/min diesel pump available from Bell Flow Systems.  Buy on-line here   IRON-75 Self-priming. Eccentric self-adjusting blades With recirculation bypass ATEX models available here>>:  Suction: 5m · Delivery: 30m Free flow: 75 l/min Consumption: 1.9-4.5 Amps Motor: 0.5 kW 230 VAC self-ventilated 50/60 Hz single-phase with thermal cut-out protection S1 Continuous duty IP-55 Protection 3000 rpm Connection through 1"(BSP) threads and flange option It has built-in steel filter of 350 µm (micron). ON/OFF luminous switch with IP-55 protection 3m electric cable  Anti-corrosion treatment Also available as a wall-mount or drum mount fuel transfer kit :
Read more

GWR200 Flow Sensor from APG

Image
Bell Flow Systems are pleased to introduce the new GWR200 flow sensor from APG, which promises to take the problems and frustration out of your level measurement. The Systems True Echo™ Communication Tool, which provides a Modbus-to-USB connection for communication with True Echo™ Software allows for advanced configuration and monitoring of multiple True Echo™ sensors. Specifications includes an auto calibration for easy setup with the True Echo™ software, a robust IP65 ingress protection housing, innovative signal processing and disturbance signal suppression and featuring a range up to 10 feet with SS rod, 80 feet with cable. Additionally, the sensors are unaffected by foam, vapours or dust. The Sensor NEMA 6 housing comes as standard, and its 316 SS or PFTE-coated 316 SS probes can operate in process temperatures from -40° to 203°C. Robust and reliable, the GWR200 sensor makes difficult level measurements easy. With a programmable 4-20 mA or RS-485 Modbus outputs, and innovativ...
Read more

Badger Meter Vision 3000 Turbine Meter

Image
WRAS approved Vision Turbine Meter 3000 Badger Meters Vision series of turbine flow meters have been examined, tested and found to comply with the requirements of The Water Regulations Advisory Scheme which is also known as WRAS. The low cost turbine meters from the Vision series are well known on the market. A new addition to the series is the Vision 3000. The Vision 3000 is a good choice for applications ranging from 2 to 60 l/min. It is great for the exact measurement of small quantities of liquid as well as measuring low flow rates. The Vision 3000 turbine flow meter is entirely made out of Trogamid which is low-priced, transparent and ultra-light. All materials used are compliant with the requirements of the drinking water approval.The product can be used with a variety of liquids such as water, fuels, ink and weak acids and is resistant to ethanol and methanol. The meter has an accuracy of ±3% of actual flow. The Vision 3000 is available in DN12 in G 3/4" and N...
Read more